PAS 68 Heavy Duty Rising Kerbs with Manual Hand Pumping Facility
Introduction of Hydraulic road blocker:
Road blockers are designed especially for entrance points which
have a threat of vehicle attack or for the ones that have high
security requirements. If there is a threat of vehicle attack in
addition to the control of vehicle access in high security
applications, hydraulic road blockers are the unique solution and
the most secure systems. Even though the attack is from high
tonnage vehicles with high speeds, it's not possible for the
vehicle to keep on moving because of the damage given to front,
wheels and the bottom of the vehicle.
Road blocker with parking barrier gate, smart card charging
management system and access control attendance system compose a
perfect crossing management system( can be added according to
Features of hydraulic road blocker:
- Strong and durable structure, high load bearing, movement smooth,
low noise, fast speed, long service life.
- Adopting PLC control, system operation is stable and performance is
reliable., easy to integrate
- Supporting the gang control with parking barrier or other
equipment. It can also work with other access control system.
- Adopting the advanced hydraulic drive technology. The whole system
is high security, reliability, and stability.
- Manual hydraulic system meet the requirement of fire management (In
case of power failure or malfunction)
- Remote control device: Through wireless remote control, it can
control the rising and falling of road blocker within distance of
- Convenient to maintain: in the case of structural failure or
machine maintenance, you can loose the screw on the cover and take
off the 16mm cover plate for corresponding operation.
Specifications of hydraulic road blocker:
|Product||Hydraulic road blocker|
electric hydraulic control
380V( control voltage:24V)
3 ~ 5 s
3 ~ 5 s
Photo of hydraulic road blocker:
1) Installation position
The road blocker should be installed on the user-specified vehicle
entrance and exit. Hydraulic station,
according to the actual situation of the scene, installed in the
appropriate location for easy operation
and maintenance, close to the road blocker (inside or outside of
security room ). Control box should be
set in a place where is easy to control and operate according to
the customer request (Next to the work
station of the personnel on duty).
2) Pipeline connection
2.1. There are 5 meters of the hydraulic pressure pipeline
equipped, the exceeding part should be
charged. After confirmed the installation position of road blocker
and hydraulic station (can know how
long the oil pipeline), we need to excavate foundation. When the
foundation excavation, we should take
the terrain into consideration to arrange the trend of the
hydraulic oil pipe and control wire. We should
ensure that pipeline is under the condition of no damage to other
underground facilities, then buried it
safely. Make mark in the appropriate location, to avoid damage of
pipelines when other construction
operations is implementing.
2.2,groove size of the pipeline should be based on the specific
terrain. Under normal circumstances,
the embedded depth of the hydraulic pipeline is 10 ~ 30 cm and
width 15 cm , the embedded depth of
wire is 5 ~ 15 cm, width is about 5 cm.
2.3.Threading pipe (PVC pipe) should be added to protect the
controlling wire, so is the oil pipe.