Pedestrian control Flap Barrier Gate 0.5 second fast speed with
It is an innovative pedestrian control technology that designed to
achieve best balance quality, performance and affordability.
It provides a combination of reliable mechanical as well as
electronic retriction for unauthorized visitor while still maintain
a welcoming atmosphere. Access control and time attendance reader
can be integrated into flap barrier to improve accuracy of
It is ideal indoor solution for railway platform, passenger
terminal, ferry, airports, checkpoints, factories,
stadium, lift lobby of commercial, industrial or government
building. Flap barrier give a more premium and organized entrance
to your building.
1. Faster opening
Flap barrier support up to 0.5 sec opening / closing time. This
allow higher pass throught traffic rate and
effectively reduce long queue in front of entrance/exit door during
2. Designed to be safe
- Flap will only close after all IR sensor confirmed that the
pedestrian has finished passing through. This ensure flap will not
crush onto a pedestrian.
- During power failure, flap will automatically open by itself to
allow free passage for emergency escape. Flap will automatically
close back when power resume.
- Inteligent sensor will auto reverse the flap if there is a sudden
incoming obstacle while the flap is closing. Flap will also auto
reverse if there is something blocking the flap to avoid motor
overload and damage itself.
3. Auto close timer
Flap will auto close if there is no pedestrian passing through
after the delay time elapsed. This will avoid
unauthorized user from sneaking into the building when flap was
opened wrongly. The delay time can be
preset in control panel.
4. Alarm detection
Built in high sensitivity infrared photocell to detect unauthorized
and abnormal access. Alarm will sound and red light to alert
security guard. Flap shall remain securely locked if it did not
receive any authorized signal from access control system.
5. LED display indicator
LED display at front and back can be set to display correct passage
direction once activated. This ensure pedestrian go into the
correct lane when multiple flap barrier is installed side by side.
Display can show “X” if no access is permited.
|Voltage||AC220 ± 15V 50Hz|
AC110 ± 15V 60Hz
|Passing speed||30-40 person per minute|
|Communication socket||RS232 Standard socket/ LAN socket|