DC 24V motor anti jumping Flap Barrier Gate 1 second runing speed
with backup battery
Introduction of Flap Turnstile Gate:
Flap Barrier is an upgraded products from tripod turnstile and
swing barrier. It has standard electrical interface which can be
connected with ID cards, IC cards, magnetic cards, barcode cards
etc. The integration system ensures passing in order and will never
allow unauthorized persons to go in or go out.
Sinomatic flap turnstile gates are space efficient security
barriers, with a compact design, yet offer sufficient space to
integrate any access control system. They can be mounted with
display, passage counter, card reader, token operation, traffic
lights, command console, alarm system against unauthorised entries.
Applications of Flap Turnstile Gate:
Professional flap turnstile gate is your ideal choice for entrance
control and widely applied in:Community, school, bank, seabeach,
shopping center and so on.
Features of Flap Turnstile Gate:
1. Problem-self-checking function.
2. Many options of working ways: bi-direction card reading; one
direction card reading and another no reading; one direction card
reading and another freely. And single direction photocell
controlled passing and close. Working ways can be set in the
3. When power off, arm open automatically and power on again, arm
will be held automatically.
4. When valid card read and passenger passed, arm can be delayed to
close from 1-60s which can be set in the control panel.
5. Auto-reposition function: After card read, passenger not pass
within regulated time period, full-height turnstile will cancel
this passing right. And the regulated time period for passing can
be set by managers.
6. If passenger pass without card read or valid card read, flap
barrier will alarm untill passenger get back from the flap barrier
and then take a valid card to be read for passing.
7. Flap barrier is with interface for system integrator.
8. Anti-rush function: if there is no open single, arm will be
9. Double anti-clipping function: photocell anti-clipping and
mechanical anti-clipping.When passenger is going through the flap
barrier, photocell will detect out this situation and will not
close. After passenger passed, arm will close automatically. During
its reposition, if arm meets any obstacle, arm will get back
automatcially or stop working for a while with very slight force.
Also it will alarm.
10. Flap barrier is with standard electrical interface for the
integration of various readers and writers.
11. Direction display to guide passenger which direction is to go.
12. Stable running with little noise.
Specifications of Flap Turnstile Gate:
AC220±10%V 50Hz/AC110±10% 60Hz
Access device input voltage
Dry contact or 12V electrical level signal
or > 100ms 12V impulse signal, driving current > 10mA
DC 24V (brush motor)
Max flow rate
25 to 30 person per minute
Flap opening / closing time
Reset time when power on
Case of Flap Turnstile Gate: