Anti Vehicle Hydraulic Road Blocker With Spikes , 6 Meter Long
We are amongst the most prominent enterprises actively engaged in
manufacturing, trading and supplying a comprehensive array of
Hydraulic Road Blocker. To design these road blockers, our
dexterous professionals use high grade raw material and progressive
technology. These are designed especially for entrance points which
have a threat of vehicle attack or for the ones that have high
Our clients can avail from us a wide assortment of Hydraulic Road
Blocker at industry leading prices. In the manner of international
quality standards, our offered products are stringently checked by
quality controllers upon various parameters with set industrial
norms. If there is threat of vehicle attack or control of vehicle
access in high security applications, these road blockers are the
Features of hydraulic road blocker:
Drive unit is hydraulic, but in case of power failure road blocker
can be lowered or lifted manually with the help of manual hand
pump. Typical raise/lower time is 3 seconds.
n case of emergency, raise/lower time can be as low as 1.5 seconds.
With the help of PLC controller, raise/lower function can be
achieved by every kind of card readers, biometric readers like
fingerprint or hand shape, radio control, on/off key switch etc.
Besides, safety accessories like photocells, inductive loop
detectors, flashing lights or red/green traffic lights can be
integrated to the system very easily.
Typical weight of a road blocker is 2-2.5 tons (depending on road
- Adopting the advanced hydraulic drive technology. The whole system
is high security, reliability, and stability.
- Manual hydraulic system meet the requirement of fire management (In
case of power failure or malfunction)
- Remote control device: Through wireless remote control, it can
control the rising and falling of road blocker within distance of
- Convenient to maintain: in the case of structural failure or
machine maintenance, you can loose the screw on the cover and take
off the 16mm cover plate for corresponding operation.
- Strong and durable structure, high load bearing, movement smooth,
low noise, fast speed, long service life.
|Product||Hydraulic road blocker|
electric hydraulic control
380V( control voltage:24V)
3 ~ 5 s
3 ~ 5 s
Photo of hydraulic road blocker:
1) Installation position
The road blocker should be installed on the user-specified vehicle
entrance and exit. Hydraulic station,
according to the actual situation of the scene, installed in the
appropriate location for easy operation
and maintenance, close to the road blocker (inside or outside of
security room ). Control box should be
set in a place where is easy to control and operate according to
the customer request (Next to the work
station of the personnel on duty).
2) Pipeline connection
2.1. There are 5 meters of the hydraulic pressure pipeline
equipped, the exceeding part should be
charged. After confirmed the installation position of road blocker
and hydraulic station (can know how
long the oil pipeline), we need to excavate foundation. When the
foundation excavation, we should take
the terrain into consideration to arrange the trend of the
hydraulic oil pipe and control wire. We should
ensure that pipeline is under the condition of no damage to other
underground facilities, then buried it
safely. Make mark in the appropriate location, to avoid damage of
pipelines when other construction
operations is implementing.
2.2,groove size of the pipeline should be based on the specific
terrain. Under normal circumstances,
the embedded depth of the hydraulic pipeline is 10 ~ 30 cm and
width 15 cm , the embedded depth of
wire is 5 ~ 15 cm, width is about 5 cm.
2.3.Threading pipe (PVC pipe) should be added to protect the
controlling wire, so is the oil pipe.